Ross CrossOver 12 Instrukcja Obsługi Pobierz pdf (Strona 21)

Patterns,Washes, and

Mattes

Patterns, Washes, and Mattes are internally generated

graphical elements that can be used for key or

background ﬁll, key shapes, and transition effects. The

switcher has a limited number of pattern and matte

generators dedicated to each MLE.

Patterns

Pattern generators are used for wipes, masks, and washes.

Each pattern generator can create a single pattern output

that can be adjusted to create a speciﬁc look.

Patterns can be applied to the following:

•

Wipes — Press WIPE.

• Masks — Select the key you want apply the mask

to and use the Mask knob to select Pattern.

•

Washes — Select the matte generator (BG) on a

background or key bus and use the Wash knob to

select On.

To Set Up a Pattern

When a pattern generator is assigned to a wipe, mask, or

wash, the pattern setting are displayed. Selecting the

WIPE button, KEY SEL button, or the matte generator

(BG) returns to this menu. When a pattern generator is

assigned the pattern settings are part of the setup menu.

Use the Pattrn knob to select the wipe pattern

you want to use. You can also select the pattern

by pressing the pattern button directly.

Use the X Pos knob to position the wipe pattern

horizontally. You can also use the positioner.

Use the Y Pos knob to position the wipe pattern

vertically. You can also use the positioner.

Press NEXT.

Use the Aspect knob to adjust the aspect ratio

of the patten. Not all patterns can be adjusted.

Use the Border knob to apply a border to the

wipe.

Press NEXT. If a border is applied to the wipe

or mask, you must press NEXT multiple times

to get to the next step.

Use the Rot knob to adjust the aspect ratio of

the patten. Not all patterns can be rotated.

Use the HMult knob to multiply the pattern

horizontally.

10.

Use the VMult knob to multiply the pattern

vertically.

Washes

Washes are applied to matte generators selected on the

background or key buses and allow you to apply a

two-color affect based on a selected pattern.

To Set Up a Wash

A wash applies colors to a pattern selected for a matte.

The ﬁrst color is preset to the matte color, but both are

selectable. Selecting the source button again, or KEY

SEL button returns to this menu. Refer to the sections

on mattes and patterns for information on setting them

up. You can load a preset color instead of creating the

ﬁrst custom color.

Use the Hue 1 knob to adjust the hue of the ﬁrst

custom color.

Use the Sat 1 knob to adjust the saturation of

the ﬁrst custom color.

Use the Lum 1 knob to adjust the luminance of

the ﬁrst custom color.

Press NEXT.

Use the Wash knob to select On.

Press NEXT.

Use the Size knob to select the size of the wash

pattern.

Press NEXT > NEXT > NEXT > NEXT.

Use the Hue 2 knob to adjust the hue of the

second custom color.

10.

Use the Sat 2 knob to adjust the saturation of

the second custom color.

11.

Use the Lum 2 knob to adjust the luminance of

the second custom color.

Mattes

Mattes are solid color signals that can be applied to

backgrounds and keys, and borders. Color selection is

done either by picking a preset color, or by adjusted hue,

saturation, and luminance to create a custom color.

Mattes can be applied to the following:

•

Background — Select the matte generator (BG)

on a background or key bus. The full region of the

background or key is ﬁlled with the selected color.

•

Border — Assign a border to a WIPE transition

or a key. The wipe border is ﬁlled with the selected

color.

Carbonite Operation Manual (v6.1) — Patterns, Washes, and Mattes • 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Komentarze do niniejszej Instrukcji

Brak uwag

Ross CrossOver 12 Instrukcja Obsługi Strona 21

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Switche sieciowe Ross CrossOver 12