Ross CrossOver 12 Instrukcja Obsługi Pobierz pdf (Strona 43)

Custom Controls

Once programmed, a custom control can be played back

by pressing a button. The custom control can be as simple

as triggering an output GPI pulse, or as complex as

recalling a speciﬁc memory register on an MLE,

performing a switcher transition, and selecting a group

of keys.

Custom Control Setup

The custom control interface on your switcher can be

customized to show custom control names on the

mnemonics just below the Custom Control bus, or

automatically add delays between each custom control

event as you are recording a custom.

To Set Custom Control Options

Press BANK 1 > EDIT > NEXT.

Use the Row knob to select the control panel

row that you want to set how the custom control

names appear on the mnemonics.

Use the CCMem knob to set how custom control

names are shown on the mnemonics.

•

Off — only video source names are shown

•

Split — mnemonics are split with custom

control names on the top and source names

on the button

•

Full — only custom control names are shown

If you selected Split, use the MColor knob to

select whether the mnemonics use the bus map

color (Xpt) or the custom control color (CC).

Use the CCPaus knob to set whether pauses

are added automatically after each event.

•

Manual — pauses are not added

automatically

•

Record — each command is automatically

separated from the previous command by a

pause equal to the real-time delay between

the user entering commands

Recording Custom Controls

When you create a custom control, you record a series

of button presses on the panel, as well as special

functions, that are played back when you run the custom

control.

Almost any action or setting can be stored in a custom

control, with the following exceptions:

• Diagnostic Functions

• Conﬁrmation Dialogs

• Panel-Speciﬁc Functions

To Record a Custom Control

A basic custom control records a series of button presses

on the control panel. If the CCPaus feature is set to

Record, pauses will automatically be added between

button pressed. If it is set to Manual you will have go

back and edit the custom control to add the pauses.

Press MENU > BANK 1 > START/STOP.

Use the Bank knob to select the bank that the

custom control you want to record will be stored

on, or select the bank button directly.

Use the CC knob to select the custom control

that you want to record, or select the custom

control on the bus directly. If the custom control

already has a macro recorded, an * is shown next

to the number.

Press START/STOP to start recording.

Insert the events you want to record. These can

include source selections, key types, transitions,

and menu selection, for example. Special

functions can also be inserted.

Each custom control can have a maximum of 99

events, plus the End event.

Press START/STOP to ﬁnish recording. You

can also press CANCEL if you do not want to

store your changes to the custom control.

Special Functions

Special functions allow you to include events not

associated with a button press into a custom control. A

special function can be inserted into any existing custom

control, or used when creating a new custom control.

Hold

Allows you to place a command in a custom control

that will stop the custom control at the hold. You must

press the custom control button again, or use a GPI

trigger, to continue the custom control.

Pause

Allows you to place a command in a custom control

that will stop a custom control at the pause. The length

of the pause is set when the pause is inserted.

When holding the INSERT button, pauses are shown

as Px, where x is the length of the pause in frames.

Carbonite Operation Manual (v6.1) — Custom Controls • 43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Komentarze do niniejszej Instrukcji

Brak uwag

Ross CrossOver 12 Instrukcja Obsługi Strona 43

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Switche sieciowe Ross CrossOver 12